| Author |
 Topic  |
|
|
AMenge
Starting Member
9 Posts |
 Posted - June 29 2011 : 08:45:50
|
Hi!
I tried to boot my ney notebook (Samsung RV511) from the WinPE-cd. The start screen appears and the prograss bar runs up to 100%. Then the screen turns to black ans thats it. No more acitivity from the cd-drive and thats it.
I've created the cd on another pc but this shouldn't be a problem. |
|
|
alan9182
Advanced Member
United Kingdom
527 Posts |
Posted - June 29 2011 : 10:32:50
|
Does the Boot CD work on the P.C. that created it ?
Are the two P.C.s identical in every respect, both in hardware and operating system ?
O/S: Microsoft Windows 7 Ultimate *64 SP1
Graphics: HIS ATI Radeon HD 4670 1GB GDDR3
Motherboard: ASUS M3A32-MVP DELUXE AMD 790FX
Processor: AMD Phemom 9500 Quad Core 2206 Mhz
Hard Drive: Samsung HD103SJ, 931GB, MBR, 32MB Cache
Hard Drive: WD Caviar Black, 640GB, GPT, 32MB Cache
RAM: Corsair XMS 6400 4GB (2X2GB) 800mhz
|
 |
|
|
AMenge
Starting Member
9 Posts |
Posted - June 29 2011 : 10:45:04
|
quote:
Originally posted by alan9182
Does the Boot CD work on the P.C. that created it ?
Yes.
quote:
Are the two P.C.s identical in every respect, both in hardware and operating system ?
No, they are different. The pc I've creatd the cd on is an amd 64 x2 with windows 7 (32-bit). The notebook has an intel core i3 processor and is running under win7 (64bit).
But a standard boot-cd should start on different hardware I think. Both are standard x86-pcs without any special hardware like raid-controllers or something else.
Does the macrium WinPE-cd only work on the pc it is created on? |
|
|
|
alan9182
Advanced Member
United Kingdom
527 Posts |
Posted - June 29 2011 : 13:00:56
|
I only wanted you to clarify so the experts would have a better idea of the situation.
I am not an expert but I guess reaching 100% shows the CD is quite good,
but either there is a bit wrong in the CD or an incompatibility with your hardware.
I do not understand.
Does the CD work on the other P.C.
I once had a failure because somehow a 3 MB component was omitted from my CD.
I did find that a Boot CD created for my 32 bit XP Laptop with IDE and USB2 would plug straight into my 64 bit Windows 7 Desktop with SATA and restore from an eSATA image file,
so there is hope.
Regards
Alan
O/S: Microsoft Windows 7 Ultimate *64 SP1
Graphics: HIS ATI Radeon HD 4670 1GB GDDR3
Motherboard: ASUS M3A32-MVP DELUXE AMD 790FX
Processor: AMD Phemom 9500 Quad Core 2206 Mhz
Hard Drive: Samsung HD103SJ, 931GB, MBR, 32MB Cache
Hard Drive: WD Caviar Black, 640GB, GPT, 32MB Cache
RAM: Corsair XMS 6400 4GB (2X2GB) 800mhz
|
|
|
| |
Topic |
|
|
|
RSS Feed
KB
WinPE doesn't start
Forum Locked
